3/DMT-Series: 3-0606 : 3/DS-Series: Range A : 3/DS-Series: Range B

3/DMT-Series: 3-0606 NC Tilting Rotary Tables

Tilting Rotary TablesApplication
High speed capabilities in both axes with 90 rpm in the rotary axis and less than 40 rpm in the tilting axis. Enormous time reduction in machining complex parts with Tilting Rotary Tables and less expensive than buying a new machine. High accuracy achieved due to the lack of backlash and precision components and engineering design.

Bearing
All sizes are equipped with pre-loaded axial-radial roller bearings with a high-loading capacity in both horizontal and vertical planes. This ensures sensitivity for the fine adjustment of the table platen.

Clamping
Distortion free active disk clamping actuated by hydraulic pressure.

Measuring System
RENISHAW RESR ring encoder with 1VPP output signal is typical. The encoder matches the requirement of SIEMENS and FANUC control.

Motors
Torque motor designed for the special requirement of the application.

Construction
The modular construction provides the widest possible freedom for application variations with our Tilting Rotary Tables.

 Tilting Rotary Tables
Technical Data Unit DMT 0606
Type Designation   6
6
Table Platen Size mm 630
inch 24.8
Other Executions   Pallet Receiver
 
T-slots Size mm 18
Number 5
Dimension L mm 1,250
inch 49.21
W mm 785
inch 31
H mm 565
inch 22.24
Center bore Ø H7 d mm 40
inch 1.57
Maximum standard tilt range deg -20/+110
Dead weight kg 1,300
lb 2,860
Permitted Load kg 300
lb 660
Nominal torque rotary axis Nm 670
ft lbs 486.75
Peak torque rotary axis Nm 1,000
ft lbs 737.5
Nominal torque tilting axis Nm 1,500
ft lbs 1,106
Peak torque tilting axis Nm 3,000
ft lbs 2,212.55
Clamping torque (Rotary) Nm 4,000
ft lbs 2,950
Clamping torque (Tilt) Nm 7,000
ft lbs 5,163
Max. speed rotary axis rpm 90
Max. speed tilting axis rpm >40
Parallelism mm 0.01
inch 0.0004
Faceplate wobble mm 0.005
inch 0.0002
Runout of center bore mm 0.005
inch 0.00002

Available Options

  • Hand scraped table top surface
  • Customized table top
  • Workpiece clamping system
  • Prepared for pallet system
  • Alternative measuring systems
  • Air inlet for internal pressurization
  • Various motors drives
  • Prepared for linear axis (saddle)
  • Hydraulic unit for the clamping system
  • Other paint surface finishes
  • NC systems to suit your application

Standard Resolution
.0001 degree (others on request)

Standard Accuracy
+/-15 arc seconds to +/-3 arc seconds.  (Higher accuracy on request).

Painted Surface Finish
RAL-color range in textured surface finish

For other specifications please contact our Technical department. The rights for technical modifications are reserved.

 

 

3/DMT-Series: 3-0606 : 3/DS-Series: Range A : 3/DS-Series: Range B

Tilting Rotary Tables3/DS-Series:  NC Tilting Rotary Tables – Range  A

(Shown with Optional Pallet System)

Application
Additional rotary and tilting axis for your machine.  High accuracy and loading capacities make our Tilting Rotary Tables suitable for machining and metrology applications.

Bearing
All sizes are equipped with pre-loaded axial-radial roller bearings, with a high-loading capacity in both horizontal and vertical planes. This ensures sensitivity for the fine adjustment of the table platen.

Clamping
Distortion free passive clamping by pre-loaded spring elements with hydraulic release.

Measuring Systems
Heidenhain ROD 250/700/800/905, RON or Rotary lnductosyn are typical.

Motors
DC and AC motors.

Construction
The modular construction provides the widest possible freedom for application variations.

 Tilting Rotary Tables
Technical Data   Unit 3-02 3-03 3-04 3-06
Type Designation     D200 D300 D450 D630
  D250 D450 D630 D800
Table Plate Size   mm 200 320 450 630
    Inches 7.87 12.59 17.71 24.80
    mm 250 450 630 800
    Inches 9.84 17.71 24.80 31.49
T-slots (DIN 650) Size mm 12 14 14 18
  number 4 6 8 8
Length L mm 710 1100 1310 1565
  Inches 27.95 43.30 51.57 61.61
Width w mm 335 500 815 960
  Inches 13.18 19.68 32.08 37.79
Total Height H mm 310 495 600 715
  Inches 12.20 19.49 23.62 28.15
Dia of Center Bore d mm 25 40 40 50
  Inches 0.98 1.57 1.57 1.97
Tilting Axis Height h mm 180 320 360 385
  Inches 7.09 12.60 14.17 15.16
Table top Height(0deg) T mm 300 400 500 635
  Inches 11.81 15.75 19.69 25.00
Max Standard Tilt Range   deg -20 / +110 -20 / +110 -20 / +110 -20 / +110
Weight (Approx)   kg 300 400 700 1,400
    lb 661 882 1,543 3,086
    kg 320 450 750 1,500
    lb 705 992 1,653 3,306
Permitted Load  (uniform) kg 180 315 500 800
    lb 397 694 1,102 1,763
Permitted Moment of load Nm 100 150 250 800
    ft lbs 72 108 181 578
Clamping Torque (Rotary) Nm 800 2,000 4,000 9,000
    ft lbs 578 1,446 2,892 6,507
Clamping Torque (Tilt)   Nm 800 2,000 8,000 18,000
    lb in 578 1,446 5,784 13,014
Total Gear Ratio  (Rotary)   120:1 240:1 360:1 360:1
Total Gear Ratio  (Tilt)     120:1 1200:1 1800:1 1800:1
Parallelism   mm 0.02 0.02 0.03 0.03
    inches 0.0008 0.0008 0.0012 0.0012
Face Plate Wobble   mm 0.01 0.01 0.15 0.15
    inches 0.0004 0.0004 0.0006 0.0006
Runout of Center Bore   mm 0.01 0.01 0.01 0.01
    inches 0,0004 0,0004 0,0004 0,0004

Available Options

  • Hand scraped table top surface
  • Customized table top
  • Workpiece clamping system
  • Prepared for pallet system
  • Alternative measuring systems made by Heidenhain. i.e. (ROD 800 or Inductosyn)
  • Air inlet for internal pressurization
  • Various motors and intermediate gear boxes
  • Prepared for linear axis (saddle)
  • Hydraulic unit for the clamping system
  • Other paint surface finishes
  • NC systems to suit your application

Standard Resolution
.0001 degree (others on request)

Standard Accuracy
+/- 15 arc seconds to +/- 3 arc seconds.  (Higher on request)

Painted Surface Finish
RAL-color range in textured surface finish 

For other specifications please contact our Technical department. The rights for technical modifications are reserved.
3/DMT-Series: 3-0606 : 3/DS-Series: Range A : 3/DS-Series: Range B

Tilting Rotary Tables3/DS-Series:  NC Tilting Rotary Tables-Range B

Application
An additional rotary and tilting axis for your machine in the size range 800mm to 2000mm diameter. With high accuracy and high loading capacities, our Tilting Rotary Tables are suitable for heavy machining and metrology applications.  Larger sizes by design.  Add more Axis machining capability to your machine, less expensive than buying a new machine!

Bearing
Preloaded axial-radial roller bearings are incorporated, to provide high rigidity in both planes. Sensitivity and fine positioning are ensured.

Clamping
Distortion free passive clamping by preloaded spring elements and hydraulic release.

Measuring Systems
High precision Heidenhain angular encoders and rotary inductosyns are standard.

Motors
DC and AC motors.

Construction
The modular design provides freedom to match application requirements. The tilt axis is driven on both sides which are linked by one shaft to ensure rigidity and synchronous motion.

 Tilting Rotary Tables
Technical Data   Unit 3/DS-0808 3/DS-1010 3/DS-1212 3/DS-1616
Type Designation     D800 D1000 D1250 D1600
  D1000 D1250 D1600 D2000
Table Plate Size   mm 800 1000 1250 1600
    Inches 31.50 39.37 49.21 62.99
    mm 1000 1250 1600 2000
    Inches 39.37 49.21 62.99 78.74
T-slots (DIN 650) Size mm 18 18 22 22
  number 8 8 8 8
Dimension L mm 2540 2840 3500 4100
  Inches 100.00 111.81 137.79 161.42
  w mm 900 900 1400 1700
  Inches 35.43 35.43 55.15 66.93
  H mm 1100 1100 1400 1800
  Inches 43.31 43.31 55.12 70.87
  mm 1100 1100 1400 1800
  Inches 43.31 43.31 55.12 70.87
Tilting Axis Height h mm 700 700 1200 1200
  Inches 27.56 27.56 47.24 47.24
Table Top Height(0deg) T mm 620 620 1150 1150
  Inches 24.41 24.41 45.28 45.28
Length of Clamping Ledge   mm 450 450 700 700
    Inches 17.72 17.72 27.56 27.56
Center Bore d mm 100 100 100 100
  Inches 3.94 3.94 3.94 3.94
Weight (Approx)   kg 7,000 8,000 15,000 20,000
    lb 15,400 17,600 33,000 44,000
    kg 7,500 8,500 16,000 21,000
    lb 16,500 18,700 35,200 46,200
Loading Capacity  (uniform) kg 2,500 3,000 4,000 5,500
    lb 5,500 6,600 8,800 12,100
Permitted Machining Force N 25,000 25,000 50,000 75,000
    lbs 5,500 5,500 11,000 16,500
Rotary Axis Nm 16,000 16,000 25,000 35,000
Clamping torque (Std)   ft lbs 138,583 138,583 216,535 303,150
Tilting Axis   Nm 24,000 24,000 32,000 40,000
Clamping torque (Std)   lb in 207,874 207,874 277,165 346,456
Maximum Load Moment   Nm 20,000 35,000 40,000 50,000
    lb in 173,228 303,150 346,457 433,070
Rotary Axis   Nm 11,000 11,000 19,000 27,000
Max. Milling torque   lb in 95,276 95,276 164,567 233,858
Tilting Axis   Nm 30,000 35,000 40,000 50,000
Max. Milling torque   lb in 259,842 301,500 346,457 433,070
Rotary Axis Main gear Ratio   360:1 360:1 360:1 360:1
Tilting Axis Main Gear Ratio     4680:1 4680:1 4680:1 4680:1
Parallelism   mm 0.030 0.030 0.040 0.040
    inches 0.0012 0.0012 0.0016 0.0016
Face Plate Runout   mm 0.020 0.020 0.020 0.030
(0.9 x D max)   inches 0.0008 0.0008 0.0008 0.0012
Runout of Center Bore   mm 0.010 0.010 0.010 0.010
    inches 0,0004 0,0004 0,0004 0,0004

Available Options

  • Hand scraped table top surface
  • Customized table top
  • Workpiece clamping system
  • Prepared for pallet system
  • Alternative measuring systems made by Heidenhain. i.e. (ROD 800 or Inductosyn)
  • Air inlet for internal pressurization
  • Various motors and intermediate gear boxes
  • Prepared for linear axis (saddle)
  • Hydraulic unit for the clamping system
  • Other paint surface finishes
  • NC systems to suit your application

Standard Resolution
.0001 degree (others on request)

Standard Accuracy
+/- 15 arc seconds to +/- 3 arc seconds.  (Higher on request)

Clamp Release Pressure
90 bar or 1300 psi

Painted Surface Finish
RAL-color range in textured surface finish

For other specifications please contact our Technical department. The rights for technical modifications are reserved.